Extrude can use faces (its edges are actually used), edges, surface bodies (treated like faces), line bodies (treated like edges) as input geometric entities as well as from named selections. Point feature points and vertices can also be selected as input geometry.
Example: Yes, using EXTRUDED BODY direction selection in the box under the end condition drop down.19 ene. 2012
es: Cuerpo extruido
Isotropic Thermal Conductivity
NOUN
Materials are considered to be isotropic if the properties are not dependent on the direction. The thermal conductivity of a material is a measure of the ability of the material to conduct heat. ...
Example: In an ISOTROPIC medium, the THERMAL CONDUCTIVITY is the parameter k in the Fourier expression for the heat flux. where is the heat flux (amount of heat flowing per second and per unit area) and. the temperature gradient.
es: conductividad térmica isotrópica
specific heat
noun
Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree. The units of specific heat are usually calories or joules per gram per Celsius degree. For example, the specific heat of water is 1 calorie (or 4,186 joules) per gram per Celsius degree.
Example: SPECIFIC HEAT capacity is the quantity of heat needed to raise the temperature per unit mass. Usually, it's the heat in Joules needed to raise the temperature of 1 gram of sample 1 Kelvin or 1 degree Celsius
es: Calor especifico
static structure
noun
A static structural analysis determines the displacements, stresses, strains, and forces in structures or components caused by loads that do not induce significant inertia and damping effects. ... Externally applied forces and pressures.
Example: The STATIC STRUCTURE is the physical organization of a system's functional modules in terms of their structural relations.
es: estructura estática
steady-state thermal
noun
Steady-state thermal analysis evaluates the thermal equilibrium of a system in which the temperature remains constant over time. In other words, steady state thermal analysis involves evaluating the steady state of a system subjected to constant heat loads and environmental conditions.
Example: In STEADY-STATE analyses, boundry conditions and loads such as temperature, convection, heat flow, radiation, heat flux etc. ... You can define all the thermal conditions inside steady-state thermal analyses, then link the solutions that are obtained to other analyses types in ANSYS Workbench.
es: térmica de estado estable
Thermal condition
noun
Thermal comfort is the condition of mind that expresses satisfaction with the thermal environment and is assessed by subjective evaluation (ANSI/ASHRAE Standard 55).
Example: THERMAL CONDITION is the controlled application of heating and cooling to achieve a change in the mechanical properties of a material.
